Everything You Need to Know About “Thump Kegs”

Everything You Need to Know About “Thump Kegs”

There is enough misinformation about the thump keg to need some explanation to help moonshiners know what their best options are as well as to clarify exactly what a thump keg is.

The “Thump Keg,” or “Thumper Keg,” or “doubler” is a second chamber or distiller in the classic hillbilly still that essentially allows the distiller to double distill their output a second time, without having to rerun it through another still.

They are used to produce higher alcohol content moonshine. Where a single still is capable of producing 40 – 50% alcohol. By running that still a second time, you can increase that percentage.

The “thumper” is an additional piece of equipment positioned between the kettle and condenser. As part of a moonshine still, it is used in place of a column. While it might be considered “old-fashioned,” the thump keg is going through a resurgence.

Modern thumpers do not make the characteristic noise and are nicknamed doublers, although they do not actually double the alcohol content. They simply perform as a double distiller producing the same purity and increased proof as if you had separately put the batch through a second distillation.

How a Thump Keg Got It’s Name

The thump keg got it’s name from the sound made while you’re distilling. Most people thought the sound came from lumps or clumps of mash from your first chamber that enter the distilling column along with the vapor, make their way through, and land in the second keg, making a “thump” sound.

In actuality, it is the hot vapor erupting out of the pipe that periodically makes this noise. The low wine mixture is continuously heated by this hot vapor until it reaches the boiling point of alcohol. In the thump keg, this constitutes the second distillation, which produces the higher-proof alcohol than that which could otherwise be produced in a single run through the pot still.

Generally associated with the backwoods hillbilly still, the thump keg represents one of the cleverest design elements of a traditional still. Iconic, perhaps, the thump keg is a very old aspect of still design having arrived in North America along with European settlers. It is clear the use of a doubler, or thump keg, was well-known among the early colonists.

How a Thump Keg Works

The main purpose of the thump keg is to compound the distillation process, which is the process of evaporation that occurs when alcohol turns to vapor as the liquid mash is boiled. Alcohol has a lower boiling point than water, so it will turn to steam and get collected before condensing back into liquid form.

The thump keg usually holds both water and mash, or tails. As the pot still is heated, it gives off ethanol vapors, which travel through the pipe into the thump keg where it bubbles up through the contents already contained therein.

This is where it gets interesting: The vapor condenses where it heats the cold liquid that is already in the thumper. Simultaneously, a heat exchange occurs in the thump keg where the vapor cools.

There will not be any distillate until the temperature gets high enough for the compounds to vaporize. This has everything to do with the bubble size, the depth of immersion and the volume of alcohol in both the vapor and the thumper liquid. If your thumper is wide at the base, you may find it more difficult to produce vapor. This is why you tend to see more cylindrical thumpers to better facilitate this heating process.

While the kettle and metal piping used in the still are typically made of copper, the thump keg can be made of copper, stainless steel or wood. It is advisable to avoid glass, however, as this can be catastrophically dangerous should the glass break. If the thump keg is too small, the contents will heat up quickly enough, however the yield will produce a low percentage of alcohol. This is why the thump keg is usually charged with a high-alcohol content liquid, such as the tails from the last run.

Using the Thump Keg to Infuse Flavor

The thump keg can serve a dual purpose in your moonshine production. Not only does it serve well to increase the pure alcohol percentage, but it can also add a purer infusion of flavor, if you desire to flavor your alcohol. While most shiners add fruit to the mash or add the flavor to the finished product, adding it to the thump keg will steam extract the essences along with the alcohol during this second distillation process.

For some shiners, this is a mountain secret. Fruit infusion is a way to impart maximum fruit flavor without compromising potency. It could be fruit, herbs or even spices that provide a fresher, full-flavored robust whiskey. A well-managed pot still including a thump keg is capable of delivering the right volume of compounds that will carry over into the final product.

To get the most out of your thump keg, you should have:

Plenty of vapor to liquid contact, this mean a lot of small bubbles whether you use a screen or have enough pinholes at the end of the inlet tube.
A reasonable percentage of alcohol charged in the thumper liquid whether that is a small volume of mash or, better yet, some tails from the last run. Some shiners do not even add any water and, instead, only use the tails or mash.
A larger thumper, rather than smaller. A good rule of thumb is a 2:1 ratio – make the thump keg volume twice as big as the pot still. For example, to create 1 liter of spirits, make the thumper contents equal to 2 liters.

Sometimes, shiners want to know if a thump keg will work with their moonshine still’s column. These two components are incongruous. You would use a thumper instead of a column. This can be confusing when a complete moonshine still includes both, but you just need to keep in mind that it is a one or the other situation with these two pieces of equipment.

Another common misconception is that the thump keg is the same as a slobber box, considering their similar appearance in some cases. First off, the inlet pipe on the slobber box does not extend into the liquid, so there would be no way for it to bubble meaning there would be no distillation occurring. The slobber box simply provides a place for any foam or mash to be deposited so as to avoid it reaching the condenser. Sometimes, there will be a drain cock to facilitate emptying while the still is operating. The whole aim of a slobber box is to manage the waste by avoiding it reaching and contaminating the main spirits that are being collected. On a well-managed still, a slobber box is not even needed.

Hopefully, this information has been helpful in giving you the knowledge to understand what is a thump keg. Remember, the best liquids to use in your thump keg first are the tails from a previous run for the additional alcohol. Second, you can use some of the liquid you are about to distill. While not giving you as much alcohol volume as the tails would, it is still better than water. Water should be your last resort only because you are not going to get the “double-distillation” as you will with the other two options.

Sour Mash vs. Corn Mash: What is Better for Distilling?

Sour Mash vs. Corn Mash: What is Better for Distilling?

Aficionado or connoisseur, devotee or fan, those who understand the difference between bourbon and whiskey are already familiar with which is better for distilling.

Distilling whiskey involves the use of starchy grains, which are ground into a mixture, hence the term “mash.” The mash is then fermented before it is distilled, blended, and then finally aged. This is the point at which we can distinguish what separates bourbon from whiskey, despite the fact that most people assume they are one and the same.

While bourbon falls into the whiskey classification, not all whiskeys are bourbons. To be classified as bourbon, the grain mash used in distilling the whiskey must contain at least 51 percent corn and be aged a minimum of two years inside a new, oak barrel. Bourbon distillers typically have all the necessary materials to make new casks.

Another misconception is in thinking the term sour mash refers to the bourbon’s flavor, although it does have to do with producing a consistent taste.

Sour mash is a process. Sour mash distilling is akin to the process of making sourdough bread using a starter to achieve a consistent taste from one loaf to the next. By adding some of the spent mash, which is the previously fermented mash that contains live yeast, the home distiller is better able to control the yeast growth, thus producing a consistent spirit from one bottle to the next.

Both bourbon and sour mash whiskeys are descended from the moonshine that was originally produced in Kentucky and Tennessee. While connoisseurs may continue to debate over which is the superior brew, all would concur that they both comprise the distinctive American distiller’s craft. There are even societies devoted to the study of these uniquely American spirits.

Bourbon Whiskey is Made in the United States

Named for the French-Bourbon dynasty at the time, bourbon whiskey first began in territorial Kentucky. Blue Ridge Mountain distillers in both Kentucky and Tennessee managed to hide from revenue agents during the Whiskey Rebellion of 1791, which had everything to do with allowing the moonshiners to thrive in an unregulated industry. The successful production of these mountain distilleries eventually evolved into the refined bourbon and sour mash that famously hail from these parts today.

It was not until 1964 that the U.S. Congress ruled that bourbon whiskey is a “distinctive product of the United States,” and Federal regulation defines bourbon whiskey to include only bourbon that is produced in the U.S. Bourbon-makers do exist in other counties, however, only the bourbon produced in Kentucky is permitted the use of the name of the state on its labels.

The labels hold useful information to help you identify the whiskey. For example, by law, to be labeled Sour Mash Kentucky Straight Bourbon Whiskey, this bourbon has not been blended with other whiskeys, has been produced using some of the mash from a previous batch, which is the “sour mash,” and the entire product was made in the state of Kentucky.

While Tennessee whiskeys are produced using corn mash distilling, makers may only specify “sour mash” on the label if that process is used. These spirits may use the same bourbon recipe, but they are filtered through maple charcoal to achieve a different overtone. The strongest influences on the taste of bourbon are the grain, the yeast strains and the new, oak barrels. As well, even the type of wood used will contribute to the taste.

Both Kentucky and Tennessee are located where large limestone layers filter the water to a superb clarity for whiskey production and is considered by Kentucky bourbon distillers to be a signature element in their sour mash process. The predominant grain used to make all bourbon is corn, at least 51 percent. It is preferred for the sweeter, robust vanilla and maple syrup flavors that come from the sugars. Unlike the single malts made entirely from barley that come from Scotland and Ireland, rye, barley and wheat tend to be added to make up the balance of grain contained in the mash.

It All Starts with Corn Mash Distilling

Small Yeast Bubbles of Yellow Bourbon Mash with selective focus

It is generally thought distilling began in Kentucky in the late 1700s introduced by the Scots, Scots-Irish from the province of Ulster and others including the English, French, Germans, Irish and Welshmen. The possibility of identifying a single inventor of either whiskey or bourbon is unlikely.

Charring barrels for enhanced flavor when aging whiskey is a centuries-old practice in Europe. It was inevitable that this practice would migrate with the settlers.

Numerous counties were founded in the vast regions west of the Allegheny Mountains proceeding the American Revolution. Despite the region’s burgeoning growth, most people continued to refer to this area as Old Bourbon. As it happened, the main port in Old Bourbon where the whiskey was shipped was located on the Ohio River in Kentucky.

To indicate their port of origin, “Old Bourbon” was stenciled on the barrels. Like it or not, this strongly associated any corn-based bourbon whiskey with the name Old Bourbon. Most often, this was the first taste of corn whiskey most people ever had. In Tennessee, they prefer to call their bourbon “Tennessee whiskey” instead. The production process for both Kentucky Bourbon and Tennessee Whiskey are the same except that Tennessee whiskey is charcoal-filtered before going into the barrels.

Your Choice of Grains Influence the Flavor

Whether starting as whiskey or intended to be made into bourbon, it all starts with a mash bill that requires the minimum 51 percent corn with any cereal grain making up the remainder. Wheated bourbon is the result of using wheat in the mash bill instead of rye making it milder and smoother on the tongue. A higher rye content produces a dryer, spicy whiskey. The corn sugars produce a rich and syrupy quality and lends to a leathery finish as the spirit is aged. Craft whiskey distillers experiment with many different grains as accents to the corn.

Corn whiskey may either be unaged or aged in previously used barrels. You can really taste the corn influence in these whiskeys as there are little to no barrel flavors influencing the batch. If mash from a previous distillation is added to the corn mash to ensure consistency, then you have a sour mash. Most bourbons today are run off a column still that is then redistilled in a thumper. The clear spirit produced from this process is called “white dog,” which is placed in the charred new oak casks for the aging.

Sour Mash Distilling is Essentially Yeast Management

The yeast strains possessed by Kentucky and Tennessee distilleries have survived since prohibition with patents filed for their isolated yeasts. The primary purpose of the sour mash is the control of yeast reproduction with the pH balance being key to this process. Even the object used in this process are autoclaved to ensure no foreign element contaminate the desired yeast strain. The consistency of the batch depends upon this careful handling.

The sour mash process is much-praised for its ability to create an acidic environment for the yeasts. When prepared with fresh spring water as it is in Kentucky and Tennessee, its chemically neutral condition is neither acidic nor alkaline. With a pH of about 7, the yeasts cannot work correctly. It is the addition of the sour stillage, or mash, with a lower pH of between 5.0 and 5.4 that leads to the acidification of the entire mash. This brings the pH up to between 5.4 and 5.8, which is ideal for the yeasts to work properly.

Clearly, you can see the advantage to using sour mash when your goal is to achieve consistency in your white dog or if you intend to market your product as straight bourbon. The decision is ultimately yours, but at least now you have some knowledge as to the laws and regulations that come to bear upon how you identify your distillations.

What States Allow Home Distilling?

What States Allow Home Distilling?

If you or someone you know would like to make moonshine, it is important to understand what the state and federal laws are that help regulate the production and consumption of moonshine.

Only one state allows home distilling at the state level: Missouri. You can learn more about Missouri’s distilling law by reading the statute here. However, that doesn’t make it legal at the federal level, so the overall legality is still a bit murky.

In most cases, federal law aims to regulate the recreational production of moonshine and other spirits without the proper permitting. Exceptions to the rule exist if you live in certain states that allow home distillation. For example, in Missouri, anyone 21 or older can distill up to 100 gallons of moonshine per year for personal use, but you are still obligated to pay taxes on anything produced.

Federal Distilled Spirits Permit

When people ask, “Is moonshine legal?” they are often wondering whether or not moonshine is legal in their home state so that they can move forward with a still operation without breaking the law.

In the US, the TTB (Alcohol and Tobacco Tax and Trade Bureau) regulates the production of moonshine through a permitting process. If you live in one of the many states that ban moonshine production outright, you can apply for a Federal Distilled Spirits Permit, however, hobby distilling is usually not permitted. We should note that this path is not an easy option for most people because it can be expensive and involves a complicated application process.

To learn more about the Federal Distilled Spritis permit, visit here.

Federal Fuel Alcohol Permit

The other most common avenue that home distillers utilize when looking to distill at home is the Federal Fuel Alcohol Permit. This permit allows you to product fuel alcohol without the intent to consume. Also administered by the TTB, this permit is free and allows you to produce moonshine without jumping through tons of hoops. You can apply for free and only need to fill out a simple application form. Once the government approves your application, you can begin distilling alcohol without trouble.

The alcohol you produce, however, is only legal if you use it as fuel.

So this might leave your wondering: “How the heck do you get started learning the distilling trade if I’m not allowed to do it anywhere except Missouri?”

That’s a great question! The truth is we cannot condone any activities that fall outside of federal and state regulations. Your best bet to learn the distilling trade is to visit commercial distilleries and take classes there.

For more questions about home distilling tips, get in touch with Hillbilly Stills today!

Is Home Distilling Dangerous?

Is Home Distilling Dangerous?

When it comes to home distilling, the hobby can be really fun, but you also need to make sure that you’re taking the proper precautions so that you have a tasty and safe product. With any given still setup, there are inherent dangers involved; there’s a heating element, flammable vapor, and moonshine byproducts – methanol and ethanol – which can be dangerous if they’re exposed to heat or consumed improperly.

At one point or another, you’ve probably heard that distilling is inherently dangerous and might be wondering if that statement holds any water.

The truth is the distillation process can be dangerous if you aren’t following the proper precautions, using bad equipment or don’t follow the proper steps. With any craft of hobby, there is the potential for harm, but home distillers are no more in danger than a home mechanic might be of a car falling on their head. If you use the right equipment and the proven process, you really have nothing to worry about. The home distilling safety guide below will help.

Common Dangers

Fires or Explosion

The distillation process naturally produces alcohol vapor and two key byproducts: methanol and ethanol. Both of which are potentially flammable. Exposed to an open flame or dangerously high temperatures, and you could end up with an unwanted fire. Explosions are pretty rare and at no point should pressure in your still setup be high enough to actually explode. As long as you’ve got the proper equipment and a safe setup, the chances of combustion or explosions is rare.

One way to avoid any chance of fire altogether is to use an electric heating element. Electric heating elements create heat without the use of an open flame making it much, much safer to utilize in a copper still setup.

Bad Moonshine

The other prominent danger during the distilling process actually comes after you’re done brewing. If you drink improperly made moonshine, there’s a chance that you can suffer health problems as a result. The good news is that if you follow any home distilling instructions, you can easily avoid drinking bad moonshine.

The distillation process produces alcohol in the form of ethanol. As a certain boiling point, your mash will create an alcoholic vapor which is captured in the distilling column and finally condensed in the kettle. As your mash is heating up, the first chemical component – methanol – which has a lower boiling temperature actually condenses first. This is why, you’re supposed to throw out the first part of your batch. As your mash gets hotter, the methanol boils off and then you start creating ethanol vapor, which is what you want to make.

Methanol is the chemical that has given moonshine a bad rap and the source of the “moonshine will make you go blind rumor.”

So, to answer the question. No, in general, home distilling is not dangerous. Hillbilly Stills has helped countless home distillers set up their still safely to avoid an accidents. We also distill ourselves. As long as you’re using the proper equipment and are following proper instructions for making moonshine, you’ll be able to home distill safely and securely.

For more information on home distilling or to find home distilling products, visit HillbillyStills.com.

Can Your Moonshine Ever Go Bad?

Can Your Moonshine Ever Go Bad?

If you are curious about moonshine and how to make it, you might be wondering if moonshine can go bad over time. The true answer to that question really depends on the type of moonshine you have, your distilling setup, your ability to safely store your batch, and how the distilling industry defines “bad moonshine.”

Standard, Straight Moonshine

If you make moonshine the right way and don’t add flavor, it will simply never go bad.

You can store moonshine for years and not risk health problems by drinking it. Many distillers will treat their runs of moonshine the way a vineyard might treat a specific vintage.

If you’re running a batch of unflavored, straight shine, the key to ensure that it will keep is to store it properly. That means airtight containers in a dark, temperature controlled environment.

Flavored Moonshine

Although standard moonshine will never spoil no matter the amount of time you store it, flavored moonshine is a different story and has the potential go bad over time. The sugars in many of the common flavors will add additional factors and components that don’t hold up as well as straight moonshine. Additives like sugars and other flavorings have the potential to grow mold after long periods of storage.

The good news for new distillers though is that moonshine is a natural disinfectant, so it will kill most bacteria and preserve the flavor for much longer. Even once you open a jar of flavored moonshine, it will last for several years before becoming unsafe to drink or losing its taste.

Aging and Flavor

When the topic of moonshine and shelf life comes up, many people ask if moonshine gains flavor as the years pass. This theory makes sense on the surface because whiskey distillers age whiskey to enhance its flavor, but there’s a key difference between how whiskey and moonshine age.

When distillers age whiskey, they’re doing it in oak barrels and it’s the wood in the barrel and any of the other additives that give the whiskey it’s flavor. When you store in a container like a glass jar, you’re not going to develop any flavor, so don’t expect your moonshine to magically mature by sitting on the shelf in a jar.

Bad Moonshine

We mentioned the term “bad moonshine” earlier because there are things that can happen during the distilling process that can cause a batch of moonshine to go bad. For instance, if your still isn’t completely sanitized before your brew, there’s a chance that contaminants can get in the cause issues with your shine. Even if you have a clean still setup, if you don’t carefully run your batch, you can also end up with “bad” moonshine from the get go, so it won’t matter how long you store it, it’ll always be bad.

The best rule of thumb is to make sure you have a great still setup and apply proper storage to your batch after it’s done. That way, you can always prevent your moonshine from ever going bad.

 

If you’re interested in making sure your next batch of moonshine is top-notch, start with great equipment over at Hillbilly Stills.

Can Moonshine Make You Go Blind?

Can Moonshine Make You Go Blind?

We’ve all seen the cartoon of the old man hiding a jug of hooch underneath his beard. Those jugs are always labelled “XXX,” giving the impression that it’s a dangerous mixture to consume.

If you have ever considered drinking or making moonshine in your own home distillery, you’ve probably hear someone mention that those who drink moonshine can potentially go blind.

Contrary to the old wives’ tales, moonshine does not make you go blind, especially if it’s made with quality ingredients and professional equipment. Methanol toxicity is the root of the old adage that moonshine makes you go blind. Methanol, a byproduct of the distilling process, is metabolized in the human body and forms formaldehyde, which can damage the liver as well as the optic nerve, resulting in blindness.

Methanol Toxicity

There are specific reasons bad moonshine can make you go blind or even cause death, but if you’re drinking quality homemade moonshine, you likely are safe from the problem.

In the distillation process, ethanol and methanol rise out of the fermented alcohol and into the moonshine jug. Although ethanol is safe to consume, methanol is a poisonous byproduct and can cause blindness and death as mentioned above.

Methanol boils and evaporates at a lower temperature than ethanol, so it’s recommended that you dump the first 5% of your distilled moonshine as the initial amount contains a most of your methanol. This batch is called the “foreshot.”

As you take precaution and follow and proper home distillation process, you should have no issues in dealing with methanol.

Lead Contamination from Improper Still Setup

In some rare cases, a batch of moonshine can contain lead. This is almost always, always a result of faulty equipment. Some home distillers would use old automobile radiators to distill their moonshine, and those components are made out of lead-soldered parts. During the distilling process, the alcohol can pick up lead elements.

Once your moonshine has been distilled with lead parts, it’s no longer drinkable.

There was a specific case in Alabama during the early 90s when there were a series of cases where patients showed symptoms of lead poisoning after ingesting anywhere from .2 L to 1.5 L of moonshine per day. They reported symptoms including seizures, anemia, weakness, and abdominal colic.

Luckily, 99% of the time, any readily available moonshine wasn’t distilled using old car radiators so you’re in the clear. As long as you have quality equipment during the distillation process, you moonshine will always be lead-free and safe to consume.

Drinking moonshine will only make you go blind if you get a bad batch. Make sure you trust the person making the moonshine if you don’t want to run into trouble along the way, and you will have nothing about which to worry.

Ready to start home distilling? Visit our site hillbillystills.com and get gear, distilling tips, and more!

How Do You Make Moonshine?

How Do You Make Moonshine?

While it may have a dubious history, moonshining, or “shinin’” has developed into something of an art form. At its essence, moonshine is just unaged and or flavored alcohol fermented from a wide variety of sources. Moonshine is traditionally fermented from corn, but you’ll also find moonshine fermented from other sources, like grain.

There are many different ways to create moonshine and add a personal touch to the end result, however, the traditional method always revolves around three basic steps: fermentation, distillation and collecting the distillate.

The Basics of Making Alcohol

It’s possible to make alcohol out of any grain, fruit or vegetable that goes through fermentation. This process is essentially the chemical reaction that occurs between two basic ingredients – a yeast breaks down sugar.

For moonshiners, the base ingredient of choice is a corn mixture called a “mash.” A 5-gallon mash-yeast mixture will typically take two weeks to ferment.

After the corn mash is fermented, the alcohol must be distilled.

Distillation involves heating the alcohol turning it into steam. This separates the actual alcohol content from the mash. This requires having a still furnace to boil the mash mixture and a still cap with a distilling flute that allows the vapors to filter into a new holding tank. From there, some moonshiners will prime their distillation with more alcohol or cool down the alcohol into a condensed liquid form. The distillation process is based on the fact that alcohol boils at a lower temperature than water.

Before you can collect the distillate, the alcohol must run through a condenser that is cooled by water or ice. Bootleggers would often set up their stills along a river or creek and run the distillate through pipes submerged in water to cool the alcohol down. Today, most distillers have a 3rd chamber that has cooled copper tubing running throughout.

Once cooled, the filtered moonshine will then drain out of a spout at the end of the condenser.

Remember, the first 5 percent of your production should be thrown out. This is extra-strong methanol that is dangerous to consume. The trick to making good moonshine is finding the best portion of distillate. Therefore, you should expect a bit of trial and error for your first batch.

What You Need to Make Moonshine

While the basic ingredients and process of making of moonshine are simple, it’s important to have the appropriate equipment available so you can distill effectively and safely.

Typical Distilling Ingredients

To add extra kick or flavor, some moonshiners incorporate certain fruits, yeast nutrients or even more alcohol into the process, called a “thump.”

To successfully do a run of moonshine you’ll need the following equipment:

  • Mash pot – used to mix the mash and heat the mixture to generate the alcohol steam
  • Heating source – this can be an electric or gas burner underneath the mash pot
  • Distilling Column – this is where the the alcohol vapor rises and moves through the cool vertical copper column
  • Condenser, or Lyne Arm – once the highest percentage alcohol steam travels through the distilling column it condenses into another cooler metal pipe where the mixture cools down and turns back into a liquid
  • Barrel or Aging – the clear ethanol typically needs to go through some sort of flavoring or aging process, so most distilling setups have a post run flavoring/storage component like oak barrels

If you’re interested in getting into moonshine and home distilling, you can get all the essential ingredient and supplies over at Hillbilly Stills.

Is Moonshine Illegal?

Is Moonshine Illegal?

If you are interested in making moonshine for personal or commercial use, you are likely wondering if this prospective hobby is legal or not. Learning the laws related to moonshine and home distilleries is a wise move that can keep you out of potential trouble when you’re making your own moonshine.

Federal Distilled Spirits Permit

If you’re planning starting a distillery or setting up a large scale home distillery, you will need to get a permit if you would like to distill without violating state or federal laws.

If you would like to make moonshine without any legal risk, getting a federal distilled spirits permit is your first option. Depending on your state, you will need to pay a fee to get started as well as list your equipment and ingredients on your application.

Here’s a link to the federal spirits permit page. You can find out most everything that you need to know, as well as the next steps to take here: https://www.ttb.gov/spirits/spirits-permits.shtml

If you’re properly permitted, inspectors from the Bureau of Alcohol, Tobacco, Firearms and Explosives will conduct regular inspections of your distillery to check for compliance. Any issues can result in fines or even the shut down of your distillery.

Under federal law, you can also apply for an alcohol fuel producer permit.

These permits are much easier to get, and you won’t need to worry about regular visits from government officials. The catch with this path is that you are not legally allowed to consume the alcohol you produce. Many people, however, opt for this permit and still consume what they make.

Are There Penalties for Making Moonshine Without a Permit?

Like it or not, there are potential penalties for making moonshine without the proper permit.

You might be considering making moonshine without a permit so that you can skip the fee and red tape, but if you’re in violation of state and/or federal laws you’ll be facing fines and potential prison time.

Depending on your setup there’s really a wide scale for the legal repercussions of a non-permitted distillery. Likely for the small home distillery, you’ll get a warning or a small citation.

Worst case scenario, illegal distilleries could face up to five years in prison and a fine of up to $10,000. Most people shy away from making moonshine when they hear about the potential fallout, but some people refuse to let legal technicalities get in the way.

Check Your Local Laws

The regulations listed in this guide only relate to federal laws, and it’s important you remember that your local and state laws might be different.

You could feel tempted to overlook some steps so that you can get started with your distillery, but you need to educate yourself on the process and each law that could affect your freedom and financial stability.

If you have more questions about the legality of making your own moonshine and various moonshine laws, get in touch with Hillbilly Stills today!

What is Moonshine Made of?

What is Moonshine Made of?

In many ways, moonshine is similar to all other types of alcohol you can buy at any liquor store; the distillation process can only happen in so many ways so the difference really come down to the type of mash and flavoring you intend to use. However, there are a few key differences between your typical moonshine and other spirits. For the home distiller, if you’re interested in buying or making moonshine, you should understand what it’s made of and how it’s produced.

At its core moonshine is made of the following components:

  • Corn
  • Sugar
  • Yeast
  • Hot water
  • Post run flavor/aging (optional)

Like whiskey, moonshine is primarily made using corn. Historically, moonshine has also been made with rye, white sugar, and fruit, but the most common four main ingredients are almost always cornmeal, sugar, yeast, and water. Other ingredients can be added for more flavor, but they’re not necessary for the process of making moonshine.

To ultimately produce moonshine, you need to put the ingredients through 2 key processes: fermentation and distillation.

First, the corn is ground into cornmeal. Then, the meal soaks in hot water in the still, and the sugar and yeast are added. The yeast starts the process of fermentation, which is the chemical breakdown of the sugar by the yeast. The byproduct of that breakdown is what we lovingly call “alcohol.”

After the fermentation process has started, the stone furnace – or other heat source – underneath the still is heated up. As, pressure builds up in the still, and the alcohol steam evaporates, steam travels through a series of pipes into a another chamber where it is cooled. For most home still setups, you’ll only have two stills, the heating and cooling still. The second still is known as a worm box and it consists of a coiled pipe that is surrounded by cold water or ice.

Typically, home distillers will have some water source to provide continual circulation of cold water around the worm tube. In the old days, shiners would divert creek or stream water into the worm box as a natural source of circulating cooling water.

The cold water condenses the alcohol steam back into a liquid, which completes the distillation process. Finally, the now-liquid moonshine travels through a spout or hose into a bucket, bottle, or other container for post run flavoring and aging.

For advanced distillers, you might find a 3 still setup. The middle still, known as a thump keg is a heated kettle that helps to filter out some of mash chunks that sometimes make their way into the steam pipe. Some distillers might even charge the thump keg with mash or booze to give their moonshine an extra kick.

If you’re familiar with whiskey distillation, you’ll notice a lot of similarities in how you make moonshine.

The main difference between the two is the aging. Moonshine is often bottled right out of the still, but whiskey is aged in charred oak barrels before it’s sold giving it its brown or amber coloring. That’s why moonshine is often clear, and it explains why moonshine has such a strong kick. It hasn’t had any time to mellow down before being consumed.

Hillbilly Stills specializes in home distilling equipment for making moonshine. Search our products at the links below to get a head start on your first batch of moonshine.

 

What is the Difference between a Copper Still and a Stainless Steel Still?

What is the Difference between a Copper Still and a Stainless Steel Still?

When distilling moonshine, you have two primary options to use as your mash pot still: copper still and a stainless steel still. One of the most common questions among new moonshine distillers is which still is better and what are the differences between them.

Some people prefer copper stills, and others swear by stainless steel. Both options have their benefits and drawbacks, so, at the end of the day, it really comes down to a matter of personal preference. Before you invest in a still, get to know the two major types of moonshine still and their differences.

Copper Stills

Copper is the traditional metal used in moonshine stills. The reason it is so popular is because of all the food-safe materials you can use, copper is the best conductor of heat, so you can precisely control the temperature while you distill. It’s not wonder traditional French cooks prefer to cook with copper pots and pans.

Even and radiant heating is necessary in the fermentation process, because you want to keep your mash at a certain temperature to generate the alcohol steam. If you’re struggling with temperature fluctuations, there’s a chance you can burn your mash or spend a long time heating it up.

But specific to spirit distilling, using copper also removes sulfur compounds in the alcohol, which improves the taste and quality of the moonshine.

The major drawback of utilizing a copper still is that it tarnishes easily and can be somewhat difficult to clean, so you may spend more time doing maintenance on a copper still than on a more durable material like stainless steel. Last but not least, most copper stills are more expensive than stainless steel, which can be a drawback for people who want to distill on a tight budget.

Stainless Steel Stills

Stainless steel is typically cheaper than copper, so it’s a great option for beginners who don’t want to break the bank on their equipment. It’s also very durable and easy to clean. If you want a low-maintenance still that can withstand tarnishing, stainless steel is a good choice.

The main disadvantage of a stainless steel still is that it doesn’t always conduct heat evenly. It can take a long time to heat up the still and cool down the water, so you may not be able to distill with as much precision as you can with a something like a copper still. Stainless steel also doesn’t break down or remove sulfur compounds, which is important for the production of high-quality moonshine. However, you can add copper mesh to your stainless steel still to remove the sulfur compounds and improve the taste and aroma of the alcohol.

Ultimately, the best still for you depends on your experience, your budget, and your priorities. While many experienced distillers agree that copper produces the best moonshine, you can also make a great product with tough and durable stainless steel.